Prerequisites – Internet connection must be good – 40 mbps at minimum. Usb link 2/3 or Noregon DLA 2.0 adaptors connected to the truck and laptop with key on. No further software is required. It is very important that any elog device connected to the data link is removed prior to programming.
This software removes the DPF and SCR logic while leaving the DEF gauge reading full
This software removes the EGR, DPF, and SCR logic while leaving the DEF gauge reading full
This is a recent addition for customers that want to retain their EGR and DPF systems. As with other programming - the DEF gauge will read full
Same service the dealers offer, except remotely. Blank module programming is not available for these at it requires a 4 digit password from manufacture.
This leaves all systems operating to factory specifications but removes speed and torque derates caused by the aftertreatment system.
In some situations, removing an errant fault code can save replacing an ECM.
Deleted Paccar MX series engines cannot have parameters changed by the dealership. Things like road speed changes or tire size adjustments would fall into this category.
*Prices are in Canadian dollars and exclude GST. Please contact us with any special requests
Copyright © 2024 Shamrock Diesel Tuning Inc. - All Rights Reserved.
Powered by WinOLS